Skip to main content
Since 1992 — Simply Better Service Mon–Fri, 8:00 AM–5:00 PM 24/7 for contract customers
(336) 307-4218
Preventative Maintenance By , General Manager, SBS-NC Published November 20, 2026

What Commercial HVAC Maintenance Costs: Per-Unit Pricing and Worked Examples

SBS-NC publishes its maintenance prices. Here is the per-unit math, the annual cost for one unit through a multi-site portfolio, what the price includes, and what moves it.

SBS-NC technician performing scheduled preventative maintenance on a commercial condensing unit, High Point, NC
SBS-NC technician on a scheduled preventative maintenance visit, High Point, NC.

Commercial HVAC preventative maintenance is priced per unit, per visit. SBS-NC publishes its rates: $200 for the first rooftop unit or split system at a site and $149 for each additional unit, or $149 for every unit at a site with four or more. Multiply the per-visit total by the number of visits a year (two, four, or twelve) and you have the annual cost. Chillers, boilers, cooling towers, and pumps are quoted per machine after a walk-through. The rest of this guide shows the math, worked examples from one unit to a multi-site portfolio, what the price includes, and how to compare one maintenance quote with another.

SBS-NC's published maintenance pricing

Commercial HVAC preventative maintenance pricing, per visit
EquipmentPrice per visitNotes
First rooftop unit (RTU) or split system at a site$200Sites with one to three units
Each additional RTU or split system at the same site$149Second and third unit
Every unit at a site with four or more$149Replaces the $200 first-unit price
VRF systems, exhaust fans, and make-up air unitsPriced separatelyIncluded in a Quick Quote estimate
Chillers, boilers, cooling towers, and pumpsQuoted per machineAfter a plant walk-through
Trip and diagnostic fee on covered equipmentWaivedFor maintenance contract customers

Budgetary pricing. Program pricing also depends on equipment type and site access, and the actual price may be lower or higher; multi-site and contract pricing is available on request.

The formula

  • Per-visit price at a site with one to three units: $200 + $149 × (units − 1)
  • Per-visit price at a site with four or more units: $149 × units
  • Annual cost: per-visit price × visits per year (2 for semi-annual, 4 for quarterly, 12 for monthly)

The four-unit break matters more than it looks. Three units are $498 a visit and four units are $596, so the fourth unit adds $98.

Worked examples: annual commercial HVAC maintenance cost

Annual preventative maintenance cost by unit count and program (rooftop units and split systems at one site)
Units at the sitePer visitSemi-annual (2 visits)Quarterly (4 visits)Monthly (12 visits)
1 unit$200$400$800$2,400
2 units$349$698$1,396$4,188
3 units$498$996$1,992$5,976
4 units$596$1,192$2,384$7,152
6 units$894$1,788$3,576$10,728
8 units$1,192$2,384$4,768$14,304
12 units$1,788$3,576$7,152$21,456
20 units$2,980$5,960$11,920$35,760
40 units$5,960$11,920$23,840$71,520

Which program fits depends on how hard the equipment runs. Semi-annual suits offices, small retail, and light-use equipment. Quarterly is the standard for shopping centers, schools, apartment communities, and multi-tenant buildings. Monthly is for restaurants, manufacturing, and anything that runs hard all year. The program comparison on our preventative maintenance page shows what each one includes.

Multi-site portfolios: the price is per site

The unit tiers apply at each site, not across the portfolio, so a chain of small stores and a single large building with the same total unit count price differently. One round is one visit to every site.

Multi-site preventative maintenance cost examples
PortfolioPer site, per visitOne round of all sitesSemi-annualQuarterly
5 stores, 2 units each$349$1,745$3,490$6,980
6 stores, 3 units each$498$2,988$5,976$11,952
10 stores, 4 units each$596$5,960$11,920$23,840
25 stores, 2 units each$349$8,725$17,450$34,900

One contract can cover sites in several markets with the same scope, invoice format, and reporting. See the financial case for multi-site HVAC preventative maintenance for how a portfolio program is built, and retail and multi-site programs in Charlotte for an example market.

What the price includes

  • Every program: filter replacement, a full inspection of each unit, a written report per unit, 24/7 emergency response, and the trip and diagnostic fee waived on covered equipment.
  • Quarterly and monthly programs add: condenser and evaporator coil cleaning and priority dispatch for service calls.
  • Monthly programs add: monthly filter service plus asset tracking and lifecycle reporting.

The task list a visit should cover, by season and by equipment type, is in our commercial HVAC preventative maintenance checklist. A price only means something next to a task list.

What the price does not include

Repairs and replacement parts. Anything found on a maintenance visit is written up on that unit's report and quoted before work begins, so nothing is billed that was not approved. Central plant equipment is also outside the per-unit rate: it is quoted per machine, as covered below. How diagnostics and repair quotes work is on our commercial HVAC repair page.

What moves the price of a maintenance contract

  • Units per site. Sites with one to three units pay $200 for the first unit and $149 for the rest; once a site has four or more units, every unit is $149.
  • Visits per year. The biggest lever. Quarterly costs twice what semi-annual does, and it is still the right answer for equipment that loads filters and coils quickly.
  • Equipment type. Rooftop units and split systems are on the per-unit rate. VRF, exhaust, and make-up air price separately, and chillers, boilers, towers, and pumps are quoted per machine.
  • Site access. Roof access, lifts, security escorts, and after-hours-only buildings change how long a visit takes.
  • How many sites. Multi-site and contract pricing is available on request.

Why chillers, boilers, and cooling towers are quoted per machine

A rooftop unit's maintenance visit is predictable enough to price by the unit. A central plant is not. A chiller's annual work can include oil analysis, tube brushing, and eddy-current testing every few years; a boiler's includes combustion analysis and safety control testing; a cooling tower's includes cleaning, mechanical checks, and coordination with the water treatment program. The type, size, age, and condition of each machine set the hours, so we walk the plant and quote each machine. The task lists are on our commercial chiller service and boiler and cooling tower service pages.

Is preventative maintenance worth the cost?

The U.S. Department of Energy's Operations and Maintenance Best Practices Guide estimates that a preventive maintenance program costs 12 to 18 percent less than a purely reactive, run-to-failure approach. That figure is general, not a promise about any one building, and it does not count what downtime costs a store, a clinic, or a production line. The costs it is counting are the ones in the consequences of putting off commercial HVAC repairs: higher energy use from dirty coils and failed economizers, shorter equipment life, and repairs done at emergency timing instead of planned timing.

How to compare maintenance quotes

  • Same unit count, same number of visits. A quote that looks cheaper is often for fewer visits.
  • The task list in writing. Ask what is done on each unit at each visit and compare it with a checklist.
  • Filters and coil cleaning. Ask whether filters are included and how often coils are cleaned.
  • The report. One entry per unit with readings, not one line for the building.
  • How repairs are handled. Quoted before work begins, with the diagnostic fee waived or not.
  • Emergency response. Whether contract customers get after-hours dispatch and priority.
  • Who does the work. The contractor's own technicians or a subcontractor. See why self-performing contractors outperform brokers.

Get your own number

If you keep an equipment list, the Quick Quote tool turns it into a budgetary annual range in your browser, by site and by program. For a firm price, including central plant equipment, call (336) 307-4218 or request a walk-through. The program itself is described on our commercial HVAC preventative maintenance page.

Commercial HVAC maintenance cost questions

How much does commercial HVAC preventative maintenance cost?
SBS-NC prices rooftop units and split systems per unit, per visit: $200 for the first unit at a site and $149 for each additional unit, or $149 for every unit at a site with four or more. A four-unit building on a quarterly program is $596 per visit, or $2,384 a year. Chillers, boilers, cooling towers, and pumps are quoted per machine after a walk-through.
How much does a commercial HVAC maintenance contract cost per year?
Multiply the per-visit price by the visits per year. At SBS-NC's published rates, one rooftop unit on a semi-annual program is $400 a year, eight units on a quarterly program is $4,768 a year, and twenty units on a quarterly program is $11,920 a year. Central plant equipment such as chillers and boilers is added per machine.
What is included in the price of a commercial HVAC maintenance visit?
Filter replacement, a full inspection of each unit, and a written report per unit on every program. Quarterly and monthly programs add condenser and evaporator coil cleaning and priority dispatch, and monthly programs add asset tracking and lifecycle reporting. Contract customers also get 24/7 emergency response and the trip and diagnostic fee waived on covered equipment. Repairs and parts are quoted separately before any work begins.
Why are chillers, boilers, and cooling towers quoted separately?
Because the work depends on the machine. A chiller's maintenance can include oil analysis, tube cleaning, and eddy-current testing, a boiler's includes combustion analysis and safety control testing, and a cooling tower's includes cleaning and water treatment coordination. The type, size, and condition of the equipment set the hours, so SBS-NC quotes central plant maintenance per machine after a walk-through.
Is a maintenance contract cheaper than paying for repairs as they happen?
Usually. The U.S. Department of Energy's Operations and Maintenance Best Practices Guide estimates that a preventive maintenance program costs 12 to 18 percent less than a purely reactive approach, before counting downtime. A contract also turns repairs into planned work quoted in advance instead of emergency calls.

Sources & further reading

Talk to the company that does the work.

Self-performed commercial HVAC across the Southeast since 1992. Commercial HVAC preventative maintenance →

Keep reading

Preventative Maintenance

What Commercial HVAC Preventive Maintenance Actually Covers — and Why It Matters

Preventative Maintenance

The Financial Case for Multi-Site HVAC Preventative Maintenance

Preventative Maintenance

Commercial HVAC Preventative Maintenance Checklist

Central Plant

What Is a Cooling Tower and How Does It Work?

Call Now — (336) 307-4218